External walls

U=0,22 W/m2k

← 245 mm→

Low power consumption and low construction cost ensured from the prefabricated wall system PRIME developed from Easy Green. Constructing this outer wall we ensure consumption's corresponding to B + energy class according to KENAK (Energy Efficiency of Buildings Regulations) and low manufacturing costs. Ideal for small ground-floor or two-storeys prefabricated houses with low consumption, cottages and tourist accommodation.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• Polyethylene film as a vapor barrier.
• Wooden frame 150 or 100 mm*.
• Mineral wool insulation 150 mm.
• OSB oriented standard board.
• Facade of expanded polystyrene EPS 50 mm.

• Base coat reinforcing plaster reinforced with fiberglass.

• Flexible, colored, acrylic and breathable coating.

U= 0,13 W/m2k

←315 mm→

Designed to achieve maximum energy saving is the first and best choice of Easy Green for housing with low every day life and maintenance costs. Prefab wall designed to achieve the category A which is in the upper range of energy-efficient KENAK. Ideal for large and small prefabricated houses with permanent use where there is a greater need for energy savings.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• OSB oriented standard board.
• Polyethylene film as a vapor barrier.
• Wooden frame 150 mm.
• Mineral wool insulation 150 mm.
• OSB oriented standard board.
• Facade of expanded polystyrene EPS 120 mm.

• Base coat reinforcing plaster reinforced with fiberglass.

• Flexible, colored, acrylic and breathable coating.

U= 0,11 W/m2k

←365 mm→

Easy Green always pioneer in construction of low energy housing technology designed studied and constructed in 2014 the first prefabricated passive house in Greece. Easy Green is the first in Greece which developed a prefabricated wall ideal for the construction of passive houses, which achieves high air tightness, zero thermal bridges and lower thermal transmittance.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• Wooden frame of 50 mm for the independent passage of electrical installations.
• Mineral wool insulation 50 mm.
• Polyethylene film as vapor barrier and air tightness.
• OSB oriented standard board.
• Wooden frame 150 mm.
• Mineral wool insulation 150 mm.
• OSB oriented standard board.
• Facade of expanded polystyrene EPS 120 mm.

• Base coat reinforcing plaster reinforced with fiberglass.

• Flexible, colored, acrylic and breathable  coating.

U= 0,25 W/m2k

←295 mm→

The prefabricated roof of construction system PRIME offers good thermal insulation capacity and high waterproofing. Designed to ensure both high durability and low construction cost. Cover with bituminous high strength tiles of Canadian TEGOLA with multitude of colors.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• 15 mm frame for installation of gypsum board.
• Polyethylene film as a vapor barrier.
• Wooden roof beams 150 mm.
• Mineral wool insulation 150 mm.
• Breathable ventilation membrane.
• Vertical flags 35*45 in order to create a ventilation gap.
• OSB oriented standard board.
• Bituminous waterproofing membrane common.
• Bituminous high strength tiles TEGOLA.

U= 0,16 W/m2k

←453 mm→

The roofs of Easy Green constitute an entire construction philosophy. The prefabricated roofs of construction system ENERGY system are constructed to allow the transpiration of the materials and not trap moisture and heat. Roofs topped with concrete tiles of BENDERS to ensure high durability (30 years manufacturer's warranty).

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• 15 mm frame for installation of gypsum board.
• Polyethylene film as a vapor barrier.
• Wooden roof  beams 250 mm.
• Mineral wool insulation 250 mm.
• OSB oriented standard board.
• Breathable waterproofing membrane.
• Grid of horizontal and vertical wooden flags 45 mm.
• Ventilation gap.
• Concrete tiles with special parts perspiration and breathable ridge.

U= 0,13 W/m2k

←518 mm→

Designed especially for the category of passive buildings provide greater thermal and air tightness. It is especially tight without affecting the breath-ability in order to ensure high durability. This roof system includes the concrete tiles of BENDERS with durability and frost resistance.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• 15 mm frame for installation of gypsum board.
• Polyethylene film as a vapor barrier.
• Mineral wool insulation 50 mm.
• Wooden frame of 50 mm for the independent passage of electrical installations.
• Polyethylene film as an air barrier.
• OSB oriented standard board.
• Wooden beams roof 250 mm.
• Mineral wool insulation 250 mm.
• OSB oriented standard board.
• Breathable waterproofing membrane.
• Grid of horizontal and vertical wooden flags  45 mm.
• Ventilation gap
• Concrete tiles with special parts perspiration and breathable ridge.

U= 0,15 W/m2k

←388 mm→

Easy Green is one of the first companies in Greece that built prefabricated houses with wooden frame flat roof. The walking flat roof is designed to allow full use of the roof space and to build watertight terrace on the second floor.

From inside to outside consists:

• Fire resistant gypsum board 12, 5 mm.
• 15mm frame for installation of gypsum board.
• Polyethylene film as a vapor barrier.
• Wooden beams 250 mm.
• Mineral wool insulation 250 mm.
• OSB oriented standard board.
• Polyethylene film as a first step of waterproofing.

• Creation slopes to 2% with light concrete from 50-150 mm.

• Laying asphalt solution.

• Bituminous waterproofing membrane without chippings.

• Bituminous waterproofing membrane with chippings.

• Laying of screed.

• Laying of ceramic tiles.